26.5MM RELOADABLE FLARE CASING WITH MILLED IN POWDER CUP

This is version 3. This should have fixed all the issues from our original version with the primer pockets and not working in some European 26.5mm flare pistols. They are 3 and 4 inches long

Made From Machined Aluminum Casings Designed For High Performance 26.5mm Reloading! These Have Tight Tolerances and Are Made With 6061-T6 Aluminum and a redesigned Milled in Powder Cup For Efficiency and Easy Reloading!

These 26.5mm casings are designed to last a lifetime! As well as out preform other products for black powder reloading! These are versatile using 209 primers and work well with both black powder and Pyrodex. These are 3 inches tall ID is 15/16in. The primer pocket is a universal pocket to accommodate all different 209 primers as that all are different detentions. A dab of super glue is recommended for best results to seat the primer. Paper towel will work also to fill that void also. A 209 primer diameter chart is in the pictures for you to look at the different diameters of the primers.

2 versions available along with anodized colors 

3 Inch and a 4 inch version available. The measurement is measured from the base sitting on a flat surface.